Mix Posted December 16, 2017 Posted December 16, 2017 when was the last time you changed your brake pads?
CAC Posted December 16, 2017 Posted December 16, 2017 (edited) ooh helps if i read things correctly.... Edited December 16, 2017 by CAC
Vodkajellyshot Posted December 16, 2017 Posted December 16, 2017 38 minutes ago, quebecelegy said: is my mustang gonna be alright. its called hot spots.. is caused by holding your foot on the brakes when you are at traffic lights .. disc rotors are hot..you are clamping brake pads on them for a continuous amount of time.. the rest of the rotor is cooling down ..but not the part with the pads clapping = hot spots/warped bits.. you need to get those rotors machined strait again..or if they are to thin you will have to buy new ones ..
fuggnificent Posted December 17, 2017 Posted December 17, 2017 1 hour ago, Vodkajellyshot said: its called hot spots.. is caused by holding your foot on the brakes when you are at traffic lights .. disc rotors are hot..you are clamping brake pads on them for a continuous amount of time.. the rest of the rotor is cooling down ..but not the part with the pads clapping = hot spots/warped bits.. you need to get those rotors machined strait again..or if they are to thin you will have to buy new ones .. my brakes did that on my saturn and the idiot just shaved them down. i should have just replaced them because it was worse later on.
Vodkajellyshot Posted December 17, 2017 Posted December 17, 2017 23 minutes ago, fuggnificent said: my brakes did that on my saturn and the idiot just shaved them down. i should have just replaced them because it was worse later on. well yeah.. they get to thin and then warp a lot easier.. new rotors are not that dear anyway.. and swapping them over is easy as well.. you just need a number of tools..ie.. jack. jack stands .. a few of the correct size spanners/sockets
fuggnificent Posted December 17, 2017 Posted December 17, 2017 35 minutes ago, Vodkajellyshot said: well yeah.. they get to thin and then warp a lot easier.. new rotors are not that dear anyway.. and swapping them over is easy as well.. you just need a number of tools..ie.. jack. jack stands .. a few of the correct size spanners/sockets fuck no i pay them to do it i just didnt take the initiative to tell them to replace them. i think he thought i didnt have the money because i was getting a lot if work done at the time.
quebecelegy Posted December 17, 2017 Author Posted December 17, 2017 its all fixed everyone. i got it taken care of
StarPanda Posted December 17, 2017 Posted December 17, 2017 24 minutes ago, Naraku4656 said: get a new car Beat me to it
Rogue_Alphonse Posted December 18, 2017 Posted December 18, 2017 I hope the fix was an upgrade to a Power Stop brake kit
Recommended Posts